Send email to us
The Latern blind rivet can form 3 large folding feet, which are distributed over a large area and disperse the load of riveting surface.This feature allows lantern rivets to be used on fragile
or soft materials, as well as for riveting large holes and irregularly shaped holes
The Sealed Type Blind River consists of two parts, rivets and nails. Rivet consists of nail rod and nail sleeve. When riveting, the rivet is first inserted into the nail hole of the connecting part, and then the nail sleeve is set on the working section groove of the riveting from the other side of the connecting part. It is suitable for places with high waterproofing requirements.
Closed end blind rivet is a new type of blind rivet fastener. Closed rivet not only has the characteristics of easy use, high efficiency, low noise, reduction of labor intensity and so on, but also has the characteristics of good sealing performance of the connector and no rust in the rivet core of the closed rivet after riveting.
· Aluminum Domed Head Open End Core-pulling Blind Rivets
· GB12618 BLIND RIVET
All aluminium rivet is widely used in different field.The strength of tensile and shear is higher than alu/steel material .
Technical Parameters
Model:Close end blind rivet
Material:Alu.steel
Surface:Zinc plated ,polish
Standard:export standard
Type o company:Manufacturer
QC: inspection everywhere
Ome head blind rivet introduction is divided into two portions (nail shell) rivet body and mandrel. And our product is easy to operate and has high installation efficiency.