1. Firstly, prepare some rivets and a manual rivet gun.
2. Fully open the handle of the rivet gun with both hands, insert the rivet rod into the gun head, and make the gun head tightly adhere to the rivet brim.
3. Insert the riveting body into the riveting hole, so that the riveted plate is tightly attached to the tool gun head without gaps. Then, use both hands to pull the handle inward and repeat the above actions multiple times (depending on the riveting thickness and rivet length) until the rivet rod is pulled off, completing the riveting.
4. Then apply it on the countertop that needs to be nailed to see if it is suitable for your own use.
5. After using it for a period of time, when the rivet barrel is filled with rivet rods, it can be disassembled and cleaned before being loaded into the gun body for further use.
If you use a dual manual core pulling rivet gun, the adjustment of the two handles refers to the degree of opening and closing of the two handles,the head should have a Setting circles, some of which are nut rings, and some of which are hex nuts,this can be rotated to adjust the opening and closing of the handle.
Post time: Jun-29-2023