Installing blind rivets without a rivet gun
There is no rivet gun, a hammer can be used instead of installing rivets. During riveting, the hammer strikes the rivet head to expose the core, making it flush with the end face of the rivet head, completing the riveting operation. Core piercing rivets are particularly suitable for riveting situations where it is inconvenient to use ordinary rivets (which must be riveted from both sides) or pop rivets (lacking a riveting gun). It should be noted that blind rivets must be riveted using a riveting gun.
The tools for rivet construction are convenient to carry and are about the same size as electric drills, and the noise during construction is very low, which will not affect the physical and mental health of the workers. Most rivet construction can be completed by one person, so the training is not difficult, and the construction process is simple and convenient, without spending a lot of time and effort, so the cost is very low.
Simple rivet removal method:
Method 1:
The first step is to use a drill bit to drill off the flipped end.
Step 2, use a file to remove the flipped end.
Method 2:
The first step is to smoothly escape the rivet removal tool into the rivet to be removed.
The second step is to activate the rivet disassembly tool and use it to drive the shear blade to compress the shear collar.
Step 3, use a manual cutting tool to remove the collar.
Step 4,Use a hammer to disassemble the rivet from the riveted workpiece until the disassembly is completed.
Post time: Jun-01-2023