-
How to remove the blind rivet?
How to remove the blind rivet? 1、In the case of electric drill, use a handheld drill with 4mm bit to drill through the core rivet directly and mill it off. With a handheld “angle grinding machine” directly grinding off one end of the core rivet, with a steel nail 2、 of about the s...Read more -
The new trend of hand-held welding in the future — laser hand-held welding
Laser welding is high-efficiency and precise welding using a high-energy-density laser beam as a heat source, but laser welding requires a very high machining accuracy of the workpiece. If the position is shifted, and the workpiece assembly accuracy or beam positioning accuracy does not meet the ...Read more -
What is the main function of stainless steel rivets?
Any other parts made of stainless steel. If you need to rivet, you must use stainless steel rivets.Read more -
What are stainless steel rivets generally used in?
Stainless steel rivets are used in a wide range of applications, from small family life, to aircraft, ships and the aerospace industry, all can not be separated from stainless steel rivets. In medicine, it is also used in medical devices.Read more -
Rivet nut fastener construction contraindications I:
1.Do not install carbon steel riveted fasteners or stainless steel riveted fasteners before anodizing or profiling the aluminum plate. 2.Do not remove the burrs around the perimeter before installing the riveted fasteners - as removing the burrs will deplete the metal u...Read more -
How to use the rivet nut so that the life of the rivet nut is not easily reduced?
1. Be sure to comply with the specified size of the mounting hole for each pressed rivet fastener. 2.Make sure that the bottom end (or guide slot) of the riveted fastener is in the placement hole before applying placement force. 3.Ensure that the fastening force is applied between the parallel ...Read more -
Rivet nut fastener construction contraindications II:
4.Do not over squeeze, which will flatten the head, deform the threads and bend the plate. Before batch production, should 5. Do not try to use a hammer to place the fastener, the hammer will not make the plate stable activities and the contours of the fastener inlay lock. 6. Do not place screw...Read more -
4.8*12 Unigrip blind rivet High Strength steel blind rivet
Steel Unigrip blind rivet 4.8*12 steel blind rivet 4.8*12 Unigrip Remaches Material :Steel Rivets Our regular Export Rivet .High strength Than open end blind rivet .It can be used on Electric cabinet .Children’s trolley.Read more -
After the rivet gun is pulled, how to adjust the pop rivet rod clamped in the guide mouth?
There are three situations: 1. The nozzle of rivet gun is not suitable, and the jaws cannot be opened on the top of the nozzle, so the nozzle needs to be replaced. 2. Adjust the stroke in the direction of the gun mouth. Loosen the hex adjusting nut first, and adjust the direction of the claw piec...Read more -
How to adjust if the rivet gun cannot bite the rivet?
In this case, it is generally necessary to replace the claw of the rivet gun! You can take down the head shell of the rivet gun to see if the claw pieces inside have been worn. If the teeth have no grooves, you can’t replace the claw teeth to solve this problem! https://www.yukerivet.com/n...Read more -
What else can the closed oblate head blind rivets be called?
Closed oblate head blind rivets are also called: closed oblate head blind rivets, closed oblate head pull rivets, closed oblate head pull rivets. https://www.yukerivet.com/news/what-is-a-closed-blind-rivet/Read more -
The umbrella head pull stud mentioned in the blind rivet is a round head pull stud or a countersunk head pull stud?
Umbrella head pull studs are also called round head pull studs and pan head pull studs. The brim of the countersunk head pull stud is downward, and the round head pull stud is upward. https://www.yukerivet.com/news/does-the-product-have-to-be-countersunk-to-evacuate-round-head-rivets/Read more