1 、Pull rivet hole diameter should be about 0.1mm larger than the diameter of the rivet, too large will affect the strength of the connection, too small rivet insertion difficulties.
2 Riveting should be selected according to the diameter of the mandrel pull rivet gun head aperture, appropriate adjustment of the conduit position and nut locking, so that the mandrel can be freely inserted into the conduit pull clip, and then the rivet through the nail hole, press the trigger, the mandrel pull off, riveting is complete.
3、When drilling rivet holes, the aperture should be perpendicular to the surface of the workpiece。
4、In the pull rivet gun（外链） pull riveting, pull rivet gun axis must be consistent with the rivet hole axis, not skewed.
5、Pull riveting should be slightly hard pressure pull rivet gun, so that the rivet tail close to the surface of the workpiece.
Post time: Nov-24-2022