Generally, the rivet is inserted from one side of the plate, and must be supported by the jacking iron, and then riveted with the rivet. However, when riveting with a rivet gun, only one side operation is required.
The specification of rivet gun depends on its length. Generally, each rivet gun is equipped with a different type of nozzle to rivet rivets of different materials and specifications; In addition, the rivet gun is equipped with rivet steel claw, which can tightly grasp the rivet rod of the rivet, press the rivet head, and make the material close.
use method of manual rivet gun
1. First of all, we need to understand the structure of the hand rivet gun. The front is the aluminum alloy muzzle, and the middle is the rivet rod recycling bucket.
2. On the two materials to be riveted, first drill a hole with appropriate rivet specifications for later riveting.
3. Install the rivets with appropriate specifications into the aluminum alloy muzzle of the rivet gun.
4. Install the riveter for installing rivets of appropriate specification into the drilled hole.
5. Close the handle, rivet the rivets in place, and then exit the riveter, so that we can think of riveting.
Post time: Jan-06-2023