The Sealed Type Blind River consists of two parts, rivets and nails. Rivet consists of nail rod and nail sleeve. When riveting, the rivet is first inserted into the nail hole of the connecting part, and then the nail sleeve is set on the working section groove of the riveting from the other side of the connecting part. It is suitable for places with high waterproofing requirements.
Send email to us
Closed end blind rivet is a new type of blind rivet fastener. Closed rivet not only has the characteristics of easy use, high efficiency, low noise, reduction of labor intensity and so on, but also has the characteristics of good sealing performance of the connector and no rust in the rivet core of the closed rivet after riveting.
· Aluminum Domed Head Open End Core-pulling Blind Rivets
· GB12618 BLIND RIVET
All aluminium rivet is widely used in different field.The strength of tensile and shear is higher than alu/steel material .
Technical Parameters
Model:Close end blind rivet
Material:Alu.steel
Surface:Zinc plated ,polish
Standard:export standard
Type o company:Manufacturer
QC: inspection everywhere
Ome head blind rivet introduction is divided into two portions (nail shell) rivet body and mandrel. And our product is easy to operate and has high installation efficiency.
Open type countersunk head blind rivet
This product is made of aluminum and stainless steel or steel.
Rivets are made of high quality aluminum and stainless steel. It is anti-corrosive and rust-proof and beautiful.
Diameter: 1/8 ~ 3/16″ (3.2 ~ 4.8mm ) 6.4 series
Length: 0.297 ~ 1.026″ (8~ 25mm )
Riveting range: 0.031 ~ 0.75″(0.8~ 19mm ) Lengthened 4.8 series to 25mm 6.4 series to 30 mm.
Item: Aluminum Pop Rivets Fasteners
Diameter:3.2~6.4mm
Material:Aluminium .Steel
Length :5~35mm
Standad:DIN7337.GB.ISO
Rivet nut is defined as a fastener with internal threads for attaching movable parts which can provide a more efficient and cost-effective way of installation compared to weld-nuts and press-nuts by one-sided operation onto the panels, tubes and other thin materials.
The open end insert is a blind rivet nut threaded insert designed to provide load bearing threads in thin sheet materials. In applications such as electrical circuits.
It is used in the fastening field of various metal plates, pipes and other manufacturing industries.